Toll Free: 1800 419 3356

CAT PMC-V Human Machine Interface for PMC-D Drive Control Systems

In face conveyor or plow automation systems the Cat® PMC-V provides the human machine interface (HMI) to interact with the PMC-D drive controls to operate manual mode, visualize and change parameters and show actual process values. Within a PMC-D system minimum one and typically up to 3 PMC-Vs are in equal operation.

Request a Quote

Overview

In face conveyor or plow automation systems the Cat® PMC-V provides the human machine interface (HMI) to interact with the PMC-D drive controls to operate manual mode, visualize and change parameters and show actual process values. Within a PMC-D system minimum one and typically up to 3 PMC-Vs are in equal operation.

Components

Operating System
µITRON RTOS
Processor
32Bit RISC Microcontroller TX1940CYAF, 32MHz, internal RAM 10Kbytes, ROM 256Kbytes
RAM Memory
4Mbytes CMOS Static RAM, 4Mbytes Flash

Electrical Sockets

Socket 1 - Pin 1
Optocoupler Anode
Socket 1 - Pin 2
Relay Contact NO: a
Socket 1 - Pin 3
Relay Contact NO: b
Socket 1 - Pin 4
Optocoupler Kathode
Socket 10 - Pin 1
+12 V (A)
Socket 10 - Pin 2
Measurement Input 3
Socket 10 - Pin 3
+8.2 V
Socket 10 - Pin 4
GND
Socket 11 - Pin 1
Options
Socket 11 - Pin 2
Options
Socket 11 - Pin 3
Options
Socket 11 - Pin 4
Options
Socket 12 - Pin 2
Profibus: a (internal)
Socket 12 - Pin 3
Profibus: b (internal)
Socket 2 - Pin 1
+12 V (A)
Socket 2 - Pin 2
Serial Interface: RxD
Socket 2 - Pin 3
Serial Interface: TxD
Socket 2 - Pin 4
GND
Socket 3 - Pin 1
+12 V (B)
Socket 3 - Pin 2
Serial Interface: RxD
Socket 3 - Pin 3
Serial Interface: TxD
Socket 3 - Pin 4
GND
Socket 4 - Pin 1
+12 V (C)
Socket 4 - Pin 2
Serial Interface: RxD
Socket 4 - Pin 3
Serial Interface: TxD
Socket 4 - Pin 4
GND
Socket 5 - Pin 1
Options
Socket 5 - Pin 2
Options
Socket 5 - Pin 3
Options
Socket 5 - Pin 4
Options
Socket 6 - Pin 2
Profibus: a (internal)
Socket 6 - Pin 3
Profibus: b (internal)
Socket 7 - Pin 1
+12 V Input
Socket 7 - Pin 2
Serial Interface: TxD
Socket 7 - Pin 3
Serial Interface: RxD
Socket 7 - Pin 4
GND Input
Socket 8 - Pin 1
+12 V (B)
Socket 8 - Pin 2
Measurement Input 1
Socket 8 - Pin 3
+8.2 V
Socket 8 - Pin 4
GND
Socket 9 - Pin 1
+12 V (C)
Socket 9 - Pin 2
Measurement Input 2
Socket 9 - Pin 3
+8.2 V
Socket 9 - Pin 4
GND
Socket 11 - Pin 1
AB
Socket 11 - Pin 1
**
Socket 11 - Pin 2
AB (Profibus: a [external])
Socket 11 - Pin 2
**
Socket 11 - Pin 3
AB (Profibus: b [external])
Socket 11 - Pin 3
**
Socket 11 - Pin 4
**
Socket 11 - Pin 4
AB
Socket 5 - Pin 1
AB
Socket 5 - Pin 1
**
Socket 5 - Pin 2
AB (Profibus: a [external])
Socket 5 - Pin 2
**
Socket 5 - Pin 3
AB (Profibus: b [external])
Socket 5 - Pin 3
**
Socket 5 - Pin 4
AB
Socket 5 - Pin 4
**

Global Certifications

Types
Europe: ATEX
Types
U.S.: MSHA
Types
More certifications on demand
Types
Australia: IECEx, ANZEx
Types
China: MA
Types
Russia: GOST

Electrical Data

Supply Current - Maximum Ratings
1.5 amps
Supply Current - Typical Value
1.0 amps
Supply Voltage - Maximum Ratings
9.5 V - 13.2 V
Supply Voltage - Typical Value
12 V DC

Environmental Data

Temperature - Maximum Ratings
-20° C - +40° C (-4° F - +104° F)
Temperature - Symbol
Tamb
Temperature - Typical Value
20.0 ° C

Ripper

Height
148.0 mm

Generator Set Dimension

Length
335.0 mm

Moldboard.

Width
241.0 mm

Front End

Components
320 × 240 pixel b/w graphics display
Components
IP 68
Components
Optional additional Profibus communication channel for communication with third party computer
Components
12 SKK24 sockets for power supply, communication, sensors and actuators
Components
Power: 12 W

Features

  • Human machine interface for configuration and customization of the PMC-D/V family
  • Diagnostic features for whole system
  • Process visualization
  • Change of parameters
  • Communication link to other systems
  • Additional sensor inputs

Coming soon...............